Stauff Digital Pressure Test Kit 0-600 Bar (8700 Psi) 2m Test Hose Adaptors Case

Stauff Zero to Six Hundred bar Digital Pressure Guage and Pressure Test kit. This new and Updated 2020 model will measure and display pressures. From 0 - 600 bar, or 0 - 8700 psi it can also be set up to measure and indicate pressures in.

The Stauff Digital Pressure Test Kit is a. Lso available to measure from a full vacuum to +16 bar (-1 to +16 Bar). Manufactured In Germany for the Stauff Corporation, this is a durable instrument that has been assembled to measure & display the pressure of Oil, Water & Lubricants. How to Use a Digital Pressure Gauge. The Stauff DIGI is screwed into an existing system, using the supplied adaotrs, test ports, and 2 m long quick connect test hose, it will then measure the current pressure value.

The current pressure or ACTUAL pressure is shown on the display. The measured value is shown in the actual value display and the appropriate disered unit can be selected from the menu, Units available are. Bar, PSI, mbar, KPa, MPa. The MIN, MAX or FS (Full Scale) value is shown in the lower area of the display. Displays the current pressure in graphical form. It displays pressure peaks in the form of a line. The display is updated 20 times a second. The display is updated 3 times every second.

Displays the MIN, MAX or Full Scale value, depending on the setting. N essential tool for any mechanic or owners of hydraulic machinery that are interested in looking after their quipment and making sure that any potential problems are quickly discovered and repaired. Please select gauge range in drop box.

It comes in a foam filled safe case along with a 2 m long flexible and durable test hose & test 20 adaptors as per below. The SPG-DIGI meets the guidelines of the European Community (EU). Approved according to the following standards: DIN EN 61326-1:2013-07, EN 50581:2012. Comes with instructions as a downloadable PDF file.

There is also the option of a Female Cat test flat face fitting (see drop down box above). This combination allows instant accurate pressure reading simply by attaching to standard test ports found on most hydraulic machinery, excavators, earth movers tractors etc.

It is an important tool for heavy equipment owners and mechanics. This pressure test kit will give you a clear diagnosis of actual pressures and or potential problem areas on hydraulic valves, pumps or can be used anywhere in the hydraulic system. We are able to supply a variety of other hydraulic tee pieces & test adaptors at an extra cost, please message us your requirements. Lightweight with carry handle and locking latch.

Tough, easy to clean foam filled plastic case. Storage compartment for test hose. Digital pressure testing gauge choice of one of the standard digital pressure gauges listed below.

1 x -1 to 16 Bar or. 1 x 0 to 600 Bar digital gauge.

Test hose 2 metres long with dust caps. Suitable for mineral oil based fluids.

Working Pressure to 600 bar (8820 PSI). Test 20 x 1/4 BSPP. Test 20 x 3/8 BSP. Test 20 x 1/8 BSP. 1/2" Bspp x 1/8" Bspp reducing bush.

3/8" Bspp x 1/8" Bspp reducing bush. Test 20 x test 20 Joiner. Rubber boot to protect digital gauge. # Optional Cat test male flat face. Housing made of die-cast Zinc with TPE rubber protective covering Wetted parts: Stainless Steel 1.4404, NBR, ceramic Gaskets: NBR (Buna-N®), FPM (Viton®).

600 bar / -14.5... Diameter: 79 mm / 3.11 in Depth: 33 mm / 1.30 in Weight: 540 g / 1.19 Ibs. Text display 4 1/2-digit Size: 50 x 34 mm / 1.97 x 1.34 in Actual value display: 15 mm /.

59 in MIN-/MAX or FS display: 8 mm /. 31 in Units: bar, PSI, MPa, kPa, mbar Peak pressure measurement with 10 ms sampling rate Lighted measured value display. G1/4 made of 1.4404 Stainless Steel Vibration: IEC 60068-2-6 / 10... 500 Hz / 5 g Shock: IEC 60068-2-27 / 11 ms / 25 g Load cycles (106): 100.

±0,25 % FS typ. / ±0,5 % FS max. +50 °C / +14 °F... +122 °F Media: -20 °C...

+80 °C / -4 °F... +176 °F Storage: -20 °C... +60 °C / -4 °F... Protected from Water Jets from all dzirections. Please send us a message for any questions or special adaptor requests. IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT. If you are not satisfied, please let us know so we can make it right! Please send us a message for any questions you may have.

Out of Stock It is our desire to always have every listed item actively in stock. Occasionally (but very seldom) due to high demand, short supply or human error we may be momentarily out of stock on an item.

If there is any additional documentation that must be included for export to your location please advise when placing order. The item "STAUFF DIGITAL PRESSURE TEST KIT 0-600 BAR (8700 PSI) 2M TEST HOSE ADAPTORS CASE" is in sale since Wednesday, August 11, 2021. This item is in the category "Industrial\Heavy Machinery, Parts & Attachments\Heavy Machinery Parts & Accessories\Hydraulics".online" and is located in Gold Coast, QLD. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Part Type: DIGITAL Pressure Gauge
Modified Item: No
MPN: SPG-DIGI-B0600-B
Custom Bundle: Yes
Material: Stainless Steel
Brand: STAUFF
Compatible Equipment Make: Universal
Model Year: 2020
Compatible Equipment Type: Articulated Dump Truck
Bundle Description: Pressure Gauge, various adaptors, 2 m long test Hose, and padded case