Caterpillar 259b3 Skid Steer Track Loader, Open Rops, 71 HP

CATERPILLAR 259B3 SKID STEER TRACK LOADER, OPEN ROPS, 71 HP, OPERATING WEIGHT OF 8,934 LBS, 5900 LB TIPPING LOAD, 2-SPEED, FLOAT CONTROL, READY TO GO TO WORK! 259B3 TRACK SKID STEER LOADER. Hours: Documented Hours 750, New Meter Installed Showing. Engine Model: Cat® C3.4T.

Net Power: 71.0 Hp. Gross Power SAE J1995: 74.0 Hp. Net Power SAE 1349: 71.0 Hp. Loader Hydraulic Pressure: 3335.0 Psi. Loader Hydraulic Flow: 22.0 Gal/Min.

Hydraulic Power: 42.8 Hp. Hydraulic Power (Calculated): 60.3 Hp. Length Of Track On Ground: 59.0 In. Overall Length Of Track: 79.0 In. Length W/Bucket On Ground: 135.0 In. Length W/O Bucket: 107.0 In. Height To Top Of Cab: 78.0 In. Vehicle Width: 66.0 In. Overall Height: 152.0 In. Bucket Pin Height At Max.

Bucket Pin Height At Carry Pos: 8.0 In. Ground Clearance: 9.0 In.

Maximum Dump Angle: 49.5°. Turn Radius From Ctr - Rear: 58.0 In. Turn Radius From Ctr - Coupler: 55.0 In. Turn Radius From Ctr - Bucket: 86.0 In.

Reach W/Arms Parallel: 53.0 In. Rack Back Angle At Max Height: 87°. Rated Operating Capacities: 50% Tipping Load. Ground Contact Area: 1495.0 In2. Ground Pressure: 6.0 Psi.

Tipping Load: 5900.0 Lb. Breakout Force, Tilt Cylinder: 4508.0 Lb. Rated Operating Capacity With Optional Counterweight: 3000.0 Lb. Travel Speed Forward: 5.9 Mph. Travel Speed Reverse: 5.9 Mph.

Travel Speed Reverse - 2-Speed: 8.5 Mph. Travel Speed Forward - 2-Speed: 8.5 Mph. Cooling System: 2.6 Gal. Engine Crankcase: 2.4 Gal. Fuel Tank: 22.2 Gal.

Hydraulic System: 14.5 Gal. Hydraulic Tank: 9.2 Gal. CATERPILLAR 259B3 SKID STEER TRACK LOADER, OPEN ROPS, 71 HP. OPERATING WEIGHT OF 8,934 LBS, 5900 LB TIPPING LOAD, 2-SPEED, FLOAT CONTROL, READY TO GO TO WORK! This CAT 259B3has an operating weightof 8,934 lbs which is 6.9% lighter than others in its class.

With a net power output of 71 HP, it is 2.7% more powerful than a typical competing model in its class. This machine is equipped with optional two speed travel that will get you there faster. It has a tipping load of 5,900 lbs. This machine is a solid workhorse and ready to show it.

READY TO TACKLE ANY JOB! Applying for a vehicle loan online is one of the quickest and easiest application methods. Our secure application is easy to complete, all you need are a few personal and employment details. Only 55 miles South East of Dallas.

Check out similar vehicles in our inventory. Providence Equipment LLC reserves the right to.

Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans.

In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure.

Create Professional Listings Fast and Easy. The item "CATERPILLAR 259B3 SKID STEER TRACK LOADER, OPEN ROPS, 71 HP" is in sale since Tuesday, August 7, 2018. This item is in the category "Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Skid Steer Loaders".

The seller is "providence-equipment" and is located in Trinidad, Texas. This item can be shipped worldwide.

For Sale By: Dealer
Hours: 750
Make: CAT
Mileage: 0
Model: 259B3 TRACK SKID STEER LOADER
Serial Number: CAT259BJYYZ05364
Year: 2013