Case Sr220 Skid Steer Wheel Loader 82 Hp, 2-speed, Ready To Work

  
CASE SR220 SKID STEER WHEEL LOADER , 82 HP, OPERATING WEIGHT 7400 LBS, TIPPING LOAD 4400 LBS, 2-SPEED, READY TO WORK! Tipping Load: 4,400 Lbs. Operating Weight: 7,400 Lbs. READY TO GO TO WORK! WILL NOT BE AVAILABLE FOR LONG! Max Torque: 225 Lb Ft. Pump Flow Capacity: 12.2 Gal/Min.

Relief Valve Pressure: 3000 Psi. Length With Bucket: 11.8 Ft In. Length W/O Bucket: 9.8 Ft In. Width Over Tires: 5.9 Ft In.

Height To Top Of Cab: 6.6 Ft In. Clearance At Max Lift And Dump: 8.5 Ft In. Wheelbase: 4.3 Ft In. Reach At Max Lift And Dump: 19.5 In.

Turning Radius From Center - Machine Rear: 70.4 In. Turning Radius From Center - Inc Bucket: 84.2 In. Fuel Capacity: 25.5 Gal. Engine Oil Fluid Capacity: 2.6 Gal. Hydraulic System Fluid Capacity: 5.9 Gal. Chain Box Fluid Capacity - Each Side: 2 Gal. Operating Speed: 7.2 Mph. Max Speed: 11.9 Mph. Tire Size: 12 X 16.5. Alternator Supplied Amperage: 95 Amps. Bucket Capacity: 0.61 Yd3. CASE SR220 SKID STEER WHEEL LOADER 82 HP, 2-SPEED, READY TO WORK! This CASE SR220 is perfect for construction, agricultural and landscape. The CASE SR220 skid steer has a compact chassis making tight spaces easier to work in. This machine has an extremely low overall height, making it easy to transport with a trailer.

New cutting edge engineering make the SR220 the best in its class. Built with more torque and power, the SR220 comes with a power stance wheelbase to optimize dynamic stability while increasing maneuverability and clearance. Applying for a vehicle loan online is one of the quickest and easiest application methods.

Our secure application is easy to complete, all you need are a few personal and employment details. Only 55 miles South East of Dallas. Check out similar vehicles in our inventory.

Check with confirmation from bank. Providence has a three level loading doc and fork lift on hand to handle all loading and unloading needs. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage.

Providence Equipment is a family-owned business that has taken pride in providing top quality equipment and value to its customers for the past 30 years. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. Create Professional Listings Fast and Easy. The item "CASE SR220 SKID STEER WHEEL LOADER 82 HP, 2-SPEED, READY TO WORK" is in sale since Friday, June 23, 2017. This item is in the category "Business & Industrial\Heavy Equipment\Skid Steer Loaders". The seller is "providence-equipment" and is located in Trinidad, Texas.

This item can be shipped worldwide.

1. Brand: CASE
2. For Sale By: Dealer
3. Hours: 1826
4. Make: CASE
5. Mileage: 0
6. Model: SR220 SKID STEER
7. Net Horsepower (HP): 82
8. Operating Load: Over 2,700 lbs
9. Operating Weight: Over 9,000 lbs
10. Serial Number: NCM457433
11. Year: 2012