2013 Caterpillar 259b3 Skid Steer Track Loader, 71 Hp, Oper. Weight Of 8,934 Lbs

2013 CATERPILLAR 259B3 SKID STEER TRACK LOADER, 71 HP, OPERATING WEIGHT OF 8,934 LBS, 5900 LB TIPPING LOAD, 2-SPEED, READY TO GO TO WORK! 259B3 SKID STEER TRACK LOADER. Model: 259B3 SKID STEER TRACK LOADER. Tipping Load: 5,900 Lbs. VERSATILITY TO TACKLE ANY JOB!

DONT LET THIS CAT GET AWAY! Engine Model: Cat® C3.4T.

Net Power: 71.0 Hp. Gross Power SAE J1995: 74.0 Hp. Net Power SAE 1349: 71.0 Hp. Travel Speed Forward: 5.9 Mph.

Travel Speed Reverse: 5.9 Mph. Travel Speed Reverse - 2-Speed: 8.5 Mph.

Travel Speed Forward - 2-Speed: 8.5 Mph. Loader Hydraulic Pressure: 3335.0 Psi. Loader Hydraulic Flow: 22.0 Gal/Min.

Hydraulic Power: 42.8 Hp. Hydraulic Power (Calculated): 60.3 Hp.

Length Of Track On Ground: 59.0 In. Overall Length Of Track: 79.0 In.

Length W/Bucket On Ground: 135.0 In. Length W/O Bucket: 107.0 In. Height To Top Of Cab: 78.0 In. Vehicle Width: 66.0 In.

Overall Height: 152.0 In. Bucket Pin Height At Max.

Bucket Pin Height At Carry Pos: 8.0 In. Ground Clearance: 9.0 In. Maximum Dump Angle: 49.5°.

Turn Radius From Ctr - Rear: 58.0 In. Turn Radius From Ctr - Coupler: 55.0 In. Turn Radius From Ctr - Bucket: 86.0 In. Reach W/Arms Parallel: 53.0 In. Rack Back Angle At Max Height: 87°.

Rated Operating Capacities: 50% Tipping Load. Ground Contact Area: 1495.0 In2. Ground Pressure: 6.0 Psi.

Tipping Load: 5900.0 Lb. Breakout Force, Tilt Cylinder: 4508.0 Lb. Rated Operating Capacity With Optional Counterweight: 3000.0 Lb. Cooling System: 2.6 Gal.

Engine Crankcase: 2.4 Gal. Fuel Tank: 22.2 Gal. Hydraulic System: 14.5 Gal. Hydraulic Tank: 9.2 Gal.

2013 CATERPILLAR 259B3 SKID STEER TRACK LOADER, 71 HP. OPERATING WEIGHT OF 8,934 LBS, 5900 LB TIPPING LOAD, 2-SPEED, READY TO GO TO WORK! Of 8,934 lbs which is 6.9% lighter than others in its class. With a net power output of 71 HP, it is 2.7% more powerful than a typical competing model in its class. This machine is equipped with optional two speed travel that will get you there faster.

It has a tipping load of 5,900 lbs that can handle most anything. Applying for a vehicle loan online is one of the quickest and easiest application methods. Our secure application is easy to complete, all you need are a few personal and employment details.

Only 55 miles South East of Dallas. Check out similar vehicles in our inventory. Check with confirmation from bank. Providence has a three level loading doc and fork lift on hand to handle all loading and unloading needs. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage.

Providence Equipment is a family-owned business that has taken pride in providing top quality equipment and value to its customers for the past 30 years. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off.

While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. Create Professional Listings Fast and Easy.

The item "2013 CATERPILLAR 259B3 SKID STEER TRACK LOADER, 71 HP, OPER. WEIGHT OF 8,934 LBS" is in sale since Monday, October 16, 2017. This item is in the category "Business & Industrial\Heavy Equipment\Skid Steer Loaders". The seller is "providence-equipment" and is located in Trinidad, Texas.

This item can be shipped worldwide.

Brand: CATERPILLAR
For Sale By: Dealer
Hours: 2427
Make: CATERPILLAR
Mileage: 0
Model: 259B3 SKID STEER TRACK LOADER
Net Horsepower (HP): 71
Operating Load: 2,601 - 2,700 lbs
Operating Weight: 8,501 - 9,000 lbs
Serial Number: CAT0259BTYYZ05098
Year: 2013