2012 Caterpillar 289c Cab Track Skid Steer Loader, Ac/heat, Pilot Controls

  

2012 CATERPILLAR 289C CAB TRACK SKID STEER LOADER, AC/HEAT, PILOT CONTROLS, CAT RADIO, ELECTRIC HYDRAULIC QUICK CONNECT, 2 SPEED AND TIPPING LOAD 7,721LBS! Engine Model: C3.4 DIT. Gross Power - SAE J1995: 84 Hp. Net Power - SAE 1349: 82 Hp.

Travel Speed Forward - 2-Speed: 8.5 Mph. Travel Speed Reverse - 2-Speed: 8.5 Mph.

Travel Speed Forward: 5 Mph. Travel Speed Reverse: 5 Mph. Ground Contact Area: 2504 In2. Ground Pressure: 4.1 Psi. Length Of Track On Ground: 5.8 Ft In.

Hydraulic Power: 42.8 Hp. Maximum Loader Hydraulic Flow: 33 Gal/Min. Maximum Loader Hydraulic Pressure: 4061 Psi. Loader Hydraulic Pressure: 3335 Psi. Loader Hydraulic Flow: 22 Gal/Min.

Pump Flow: 22.2 Gal/Min. Relief Valve Pressure: 3335 Psi. Width Over Tracks: 6.5 Ft In. Length With Bucket: 12.1 Ft In.

Length With Out Bucket: 9.8 Ft In. Height To Top Of Cab: 7 Ft In. Ground Clearance: 9.1 In. Clearance At Max Lift And Dump: 8.1 Ft In. Reach At Max Lift And Dump: 2.6 Ft In.

Turning Radius From Center - Machine Rear: 64.6 In. Turning Radius From Center - Inc Bucket: 91.2 In. Bucket Pin Height - Maximum Lift: 10.7 Ft In.

Height - Top Of Cab: 7 Ft In. Overall Length Track: 89.4 In. Reach At Maximum Lift/Dump: 30.7 In. Length - Track On Ground: 69.6 In. Length - Without Bucket: 116.5 In.

Length - With Bucket On Ground: 144.8 In. Maximum Overall Height: 160.7 In. Bucket Pin Height - Carry Position: 7.7 In. Clearance At Maximum Lift And Dump: 96.7 In. Maximum Dump Angle: 50 Degrees. Rack Back Angle - Maximum Height: 85 Degrees. Turn Radius From Center Rear: 64.6 In.

Turn Radius From Center Coupler: 57.9 In. Turn Radius From Center Bucket: 91.1 In. Maximum Reach - With Arms Parallel: 50.5 In. Bucket Pin Reach - Maximum Lift: 14.6 In.

Fuel Capacity: 25.9 Gal. Cooling System Fluid Capacity: 3.7 Gal. Engine Oil Capacity: 2.7 Gal.

Hydraulic System Fluid Capacity: 15.1 Gal. Alternator Supplied Amperage: 90 Amps. Max Speed - Low Range: 5.1 Mph. Max Speed - High Range: 8.5 Mph. Rated Operating Capacities - 50% Tipping Load: 3850 Lb. Rated Operating Capacities - 35% Tipping Load: 2695 Lb. Rated Operating Capacity With Optional Counterweight: 4101 Lb.

Breakout Force - Tilt Cylinder: 7308 Lb. This Cat 289C Track Loader delivers extended reach and lift height for quick and easy truck loading. The suspended undercarriage system provides superior traction, floatation, stability and speed to work in a wide range of applications and underfoot conditions. This is the desired machine for home owners, farmers, ranchers and construction sites. Applying for a vehicle loan online is one of the quickest and easiest application methods.

Our secure application is easy to complete, all you need are a few personal and employment details. Only 55 miles South East of Dallas. Check out similar vehicles in our inventory.

Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans.

In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. Create Professional Listings Fast and Easy. The item "2012 CATERPILLAR 289C CAB TRACK SKID STEER LOADER, AC/HEAT, PILOT CONTROLS" is in sale since Friday, April 5, 2019. This item is in the category "Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Skid Steer Loaders". The seller is "providence-equipment" and is located in Trinidad, Texas. This item can be shipped worldwide.

1. Brand: CAT
2. For Sale By: Dealer
3. Hours: 4857
4. Make: CAT
5. Mileage: 0
6. Model: 289C
7. Serial Number: CAT0289CVJMP03165
8. Year: 2012