2015 CAT 236D SKID STEER WHEEL LOADER, OPEN ROPS, 73 HP, TIPPING LOAD OF 3600 LBS, OPERATING WEIGHT OF 6559 LBS, READY TO WORK WITH ONLY 837 HRS! 236D SKID STEER WHEEL LOADER.
Model: 236D SKID STEER WHEEL LOADER. YOU WILL NOT FIND A CLEANER LOW HOUR MACHINE AT THIS PRICE! DONT LET THIS ONE GET AWAY!
Engine Model: Cat C3.3B DIT (Turbo). Net Flywheel Power: 73.2 Hp.
Gross Power SAE J1995: 74.3 Hp. Net Power SAE 1349: 73.2 Hp. Peak Torque At 1,500 Rpm SAE J1995: 195.0 Lbf-Ft.Travel Speed (Forward Or Reverse): One Speed. Rated Operating Capacity: 1800.0 Lb. Tipping Load: 3600.0 Lb. Breakout Force, Tilt Cylinder: 5074.0 Lb. Height To Top Of Cab: 82 In. Vehicle Width Over Tires: 66.0 In. Ground Clearance: 7.7 In. Length With Bucket On Ground: 137.3 In.
Length Without Bucket: 108.9 In. Maximum Overall Height: 156.6 In. Bucket Pin Height At Maximum Lift: 122.9 In. Bucket Pin Height At Carry Position: 7.5 In.Reach At Maximum Lift And Dump: 16.0 In. Clearance At Maximum Lift And Dump: 92.9 In. Bumper Overhang Behind Rear Axle: 40.2 In. Turning Radius From Center Machine Rear: 64.5 In. Turning Radius From Center Coupler: 51.8 In. Turning Radius From Center Bucket: 83.0 In. Maximum Reach With Arms Parallel To Ground: 53.3 In. Rack Back Angle At Maximum Height: 91°. Operating Weight: 6559.0 Lb. Hydraulic Flow Standard: Loader Hydraulic Pressure. Chain Box, Each Side: 2.3 Gal. Cooling System: 3.7 Gal. Engine Crankcase: 3.0 Gal. Fuel Tank: 27.7 Gal. Hydraulic System: 13.2 Gal.
Hydraulic Tank: 10.3 Gal. 2015 CAT 236D SKID STEER WHEEL LOADER, OPEN ROPS, 73 HP, TIPPING LOAD OF 3600 LBS, OPERATING WEIGHT OF 6559 LBS, READY TO WORK WITH ONLY 837 HRS. This CAT 236D SKID STEER WHEEL Loader delivers extended reach and lift height for quick and easy truck loading. The High Performance Power Train with the operators comfort and control environment provides increased productivity. This machine has a tipping load of 3600 lbs, a 73 HP engine and only 837 hours.
Applying for a vehicle loan online is one of the quickest and easiest application methods. Our secure application is easy to complete, all you need are a few personal and employment details. Only 55 miles South East of Dallas. Check out similar vehicles in our inventory. Check with confirmation from bank.Providence has a three level loading doc and fork lift on hand to handle all loading and unloading needs. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Providence Equipment is a family-owned business that has taken pride in providing top quality equipment and value to its customers for the past 30 years. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom.
We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure.Create Professional Listings Fast and Easy. The item "2015 CAT 236D SKID STEER WHEEL LOADER, OPEN ROPS, 73 HP, ONLY 837 HOURS" is in sale since Monday, October 16, 2017.
This item is in the category "Business & Industrial\Heavy Equipment\Skid Steer Loaders". The seller is "providence-equipment" and is located in Trinidad, Texas. This item can be shipped worldwide.